2017 –2022 Bachelor of Science.
Faculty of Engineering, Ain Shams University
ï‚·Major: Mechanical Power Engineering
2022–2023 Full Embedded System Diploma
Under the supervision of Eng. Mohamed Abd El-Basset, Principal Embedded Software
Engineer at Valeo
Content Includes:
ï‚·Programming: C, Data Structures
ï‚·AVR MCU Peripherals: GPIO, ADC, Timers, Interrupts, EEPROM, ICU
Ahmed Mahgoub | R&D Engineer 522 February 2025
Academic Background
Professional Experience
Feb 2025 - Present Research and Development Engineer (R&D)
Elsewedy Electric
At Elsewedy Electric, research and development efforts are focused on the design, optimization, and validation of
busway systems, ensuring compliance with industry standards for safety, reliability, and efficiency. Responsibilities
include the development of new products, execution of thermal and electrical simulations (FEA), Material selection,
performance enhancement
Jul 2024 - Feb 2025 Research and Development Engineer (R&D)
Carrier, Midea - Egypt
Design AC refrigeration systems, simulate circuits, and align projects with schedules. collaborate with international
teams for seamless project execution and technical support.provide technical support using 2D and 3D modeling
software for design and simulation.
Jun 2023- Jun 2024 Mechanical Design Engineer (Owner Representative): Managed design reviews and Bill of Quantities for armed
forces projects.
Jun 2022- Jun 2023 instructor:
Taught courses in Stress Analysis, Theory of Machine, Electronics, and Engineering Physics to undergraduate students.
Ahmed Mahgoub | R&D Engineer 722 February 2025
Sep 2022-Nov 2022 Shaker Consultancy Group:
Assisted with firefighting, plumbing, and medical gases systems.
Aug 2022-sep 2022 Enppi (Engineering for the Petroleum & Process):
Received technical training in static equipment, rotating equipment, material
selection, piping, and project management.
Sep 2021-Oct 2021 proservice company as a mep site engineer
Ahmed Mahgoub | R&D Engineer 1022 February 2025
Internship
Ahmed Mahgoub | R&D Engineer 1722 February 2025
Humanoid Robot
Funded by: Ain Shams University.
ï‚·Designed and manufactured humanoid
robot for nursing duties at Ain
Shams Specialist Hospital.
ï‚·Responsibilities included
mechanical design, motor
specification calculations, and
overseeing 3D-printed components.
ï‚·Relevance: Applicable to robotics,
mechatronics, and manufacturing.
ï‚·Skills Demonstrated: Mechanical
design, prototyping, and system
integration.
Ahmed Mahgoub | R&D Engineer 1822 February 2025
Hybrid Electric Vehicles
Hybrid Electric Vehicles Modeling
Collaboration: Team project at
the Faculty of Engineering, Ain
Shams University Research Center.
ï‚·Modeled and simulated Hybrid
Electric Vehicle energy
management using MATLAB and
Simulink.
ï‚·Focused on optimizing energy
efficiency and performance.
Sep 2022-Nov 2022 Internship at Shaker Consultancy Group:
Aug 2022-sep 2022 Internship at Enppi (Engineering for the Petroleum & Process):
Sep 2021-Oct 2021 Internship at proservice company as a mep site engineer
2021–2022 Graduation Project: Micro Gas Turbine (Jet Engine)
ï‚·Conducted thermal expansion simulations for combustion chamber materials using SolidWorks.
ï‚·Utilized Ansys Fluent for CFD simulations to study air distribution in the combustor and
compressor performance.
ï‚·Performed stress analysis for turbine blades using Ansys Mechanical and SolidWorks
Nov 2020-Apr 2021 Humanoid Robot
As part of a freelance project, designed and manufactured a Humanoid Robot intended for nursing
duties at Ain Shams Specialist Hospital. Mechanical design and modeling using SolidWorks
software.
Sept 2021-May2022 Systems for Desert Reclamation in West-West Minya Egypt.
2nd mech. project Permanent Magnet Generator.
Ahmed Mahgoub | R&D Engineer 2022 February 2025
Gas Turbine (Jet Engine)
Sep 2022-Nov 2022 Internship at Shaker Consultancy Group:
Aug 2022-sep 2022 Internship at Enppi (Engineering for the Petroleum & Process):
Sep 2021-Oct 2021 Internship at proservice company as a mep site engineer
2021–2022 Graduation Project: Micro Gas Turbine (Jet Engine)
ï‚·Conducted thermal expansion simulations for combustion chamber materials using SolidWorks.
ï‚·Utilized Ansys Fluent for CFD simulations to study air distribution in the combustor and
compressor performance.
ï‚·Performed stress analysis for turbine blades using Ansys Mechanical and SolidWorks
Nov 2020-Apr 2021 Humanoid Robot
As part of a freelance project, designed and manufactured a Humanoid Robot intended for nursing
duties at Ain Shams Specialist Hospital. Mechanical design and modeling using SolidWorks
software.
Sept 2021-May2022 Systems for Desert Reclamation in West-West Minya Egypt.
2nd mech. project Permanent Magnet Generator.
Ahmed Mahgoub | R&D Engineer 2122 February 2025
Gas Turbine (Jet Engine)
